Best for Adhesives & Glue, Fasteners, Paint Accessories
Open mobile app


RIZTECHEveryday 7:00 AM - 6:00 PM
Hello! Need help? Don’t worry, I’ve got you. Tell me what’s up, and I’ll be happy to assist 💁
Short answer: This is the strongest stain‑blocking primer on the market. It seals ANY stain, sticks to ANY surface, and locks in odors permanently.
Use it when you need to block:
Water stains
Smoke stains
Nicotine
Marker, crayon, ink
Graffiti
Rust stains
Tannin bleed
Shellac = instant stain lock.
Perfect for:
Pine knots
Sap streaks
Resinous wood
It permanently seals knots so they don’t bleed through paint.
This primer locks in odors from:
Smoke/fire damage
Pets
Urine
Cooking odors
Musty smells
Once sealed, odors cannot escape.
B‑I‑N sticks to:
Glossy surfaces
Tile
Glass
Metal
Laminate
Varnish
Previously painted surfaces
No sanding required — huge time saver.
Use for:
Walls
Ceilings
Trim
Doors
Cabinets (before painting)
It creates a perfect base for latex or oil topcoats.
Restoration contractors use B‑I‑N because it:
Blocks smoke stains
Seals soot
Eliminates smoke odor
Use when surfaces are:
Water‑damaged
Nicotine‑stained
Glossy
Previously wallpapered
Difficult to coat
ZINSSER B‑I‑N Shellac Primer — Uses
Blocks ANY stain
Seals knots & sap
Sticks to ANY surface
Kills odors (smoke, pets)
No sanding needed
Interior walls, ceilings, trim, cabinets
Bangla:
সব ধরনের দাগ ব্লক করে
কাঠের গিঁট ও স্যাপ সিল করে
যেকোনো সারফেসে লেগে থাকে
ধোঁয়া/পোষা প্রাণীর গন্ধ বন্ধ করে
স্যান্ডিং লাগে না
দেয়াল, সিলিং, ট্রিম, ক্যাবিনেটের জন্য সেরা
Yes — Zinsser BIN (Shellac‑Based Primer) is good for wood, metal, and concrete, but with specific limitations depending on the surface and whether it’s interior or exterior.
Below is the clear, NYC‑hardware‑store–ready breakdown, grounded in the product’s official technical data.
Yes — excellent. Official documentation lists wood (pine, fir, cedar, redwood, plywood) as a primary recommended surface. It seals knots, sap streaks, tannin bleed, and creates a smooth, sealed surface.
Best uses on wood:
Trim, doors, cabinets
Stain blocking (water, nicotine, smoke)
Knot sealing
Fire/smoke odor sealing
Yes — for interior metal. The product is approved for aluminum, steel, stainless steel, galvanized metal, and copper.
Important:
Works great as an adhesion primer on glossy metal
Blocks rust stains
Not for exterior full‑surface metal (spot‑prime only)
Yes — for interior cured masonry. The official datasheet includes:
Stucco
Concrete block
Poured concrete
Brick
Conditions:
Concrete must be fully cured
Very porous masonry may need 2 coats
Not for floors or surfaces exposed to water immersion
Full exterior surfaces (spot‑priming only)
Floors, decks, or surfaces with standing water
High‑humidity interior areas (BIN Advanced also warns against this)
Exterior long‑term metal or concrete (use exterior‑rated primers instead)
Because NYC apartments have:
old oil‑based trim
smoke/nicotine history
water‑leak ceilings
plaster + concrete mix
BIN is often the #1 primer for:
Water‑stain ceilings
Smoke/fire odor sealing
Old brownstone trim
Heavy stain blocking
Quick turnaround jobs (dries in 20–45 minutes)
| Surface | BIN Suitable? | Notes |
|---|---|---|
| Wood | ✅ Excellent | Best for knots, stains, odors |
| Metal | ✅ Interior only | Great adhesion; not for full exterior use |
| Concrete/Masonry | ✅ Interior cured | Not for floors or wet areas |
| Exterior (full surface) | ❌ No | Spot‑prime only |
| High‑humidity areas | ⚠️ Limited | Not recommended for very damp interiors |
Best for Adhesives & Glue, Fasteners, Paint Accessories


Hello! Need help? Don’t worry, I’ve got you. Tell me what’s up, and I’ll be happy to assist 💁