Black Jack® Drive-MaxxTM 200 is a good quality blacktop filler and sealer designed for asphalt pavements. This product helps renew the look of the surface, while filling and sealing small cracks in the surface.
Two uniform Coats required! Please view the helpful application videos on this page prior to applying this product.
Black Jack Drive-Maxx 200 is a good quality blacktop filler and sealer designed for
asphalt pavements. This product helps renew the look of the surface, while filling and
sealing small cracks in the surface.
SURFACE PREPARATION: Newly paved asphalt surfaces must be allowed to cure for a minimum of
six months or a full summer’s season prior to application of any sealer. For oil stains, apply a degreas
er (or dish soap) and scrub into surface to penetrate oil spots. This step promotes proper bonding
and will help prevent adhesion failures. Repair cracks and holes with Black Jack Speed-Fill Elastic
Crack Filler for longest lasting results. For cracks and holes larger than 1” use Black Jack Speed-Patch.
For larger potholes use Ready Road Repair Permanent Pot Hole Patch (allow 6 weeks to cure). All
repaired areas must be allowed to cure, see product instructions for curing times.
APPLICATION: Turn all pails upside down prior to sealcoating (ideally for 24 hours). Then use a
paddle mixer to blend product to a uniform consistency before applying. Mix product occasionally
throughout the application process. Temperatures must be 55°F and rising, but below 90°F during
application. Do not apply if rain or cold temperatures below 50°F overnight are expected within
36 hours. This sealer is not recommended or warranted for use on surfaces containing slopes of
greater than 20°. Clean driveway thoroughly and rinse. Remove puddles and then apply sealer to a
slightly damp surface (not wet). A small amount of water separation in the pail is normal, and should
be easily mixed in. Pour out 1/3 of the container and spread product across the blacktop surface
with a squeegee. Squeegee must be used to spread product and for proper application rates. After
application with squeegee, a follow up with a brush may be used if a textured surface is desired.
Complete the entire driveway in one continuous application to prevent “color shading”. If multiple
pails are used, it is best to match batch codes and blend the end of one pail into the beginning of
the other to maintain consistent coloring and texture. Do not over apply as this may lead to tracking.
NOTE: Thick coats will result in uneven coverage, tracking and drying problems. Apply two uniform
coats. Apply the second coat perpendicular to the first, after the first coat has cured (approx. 3 - 6
hours). Driveway must cure approx. 2 - 4 hours for foot traffic and 24 - 48 hours for vehicle traffic.
Humid or cloudy conditions may prolong curing time. Two thin coats are required.
COVERAGE RATE: Approximate Coverage Rate (Per Coat) for 4.75 gallon pail: 350 sq/ft on smooth
driveways, 300 sq/ft. on rough/worn driveways. Coverage rates vary depending upon the condition
of the existing surface. A brush and/or squeegee works best, allowing the sealer to penetrate the
driveway surface. Working in a small area at a time apply thin coat, brushing away any excess as you
seal. Use a cross pattern of application to insure all voids are filled and sealed.
CLEAN-UP: While wet, clean tools with warm water and soap. If dry, scrub with citrus based cleaner.
PRECAUTIONS: Do not mix or blend this product with any other driveway products. Protective cloth
ing and eyewear should be used during application of these products, as product may cause skin
irritation. When transporting this product, ensure that lid is tight and pail secure and upright. Do
not allow pail to tumble as this may cause lid to loosen and leakage to occur. Do not transport on
passenger seats or inside the passenger compartment of any vehicle. Store product in the cargo
area of vehicle, and secure over protective cloths to prevent damage due to accidental spills. CLOSE
CONTAINER WHEN NOT IN USE. Do not reuse empty containers. Dispose of in an environmentally ac
ceptable manner, if not for yours, than for your children’s sake. This container is recyclable if cleaned
immediately. Do not pour excess product in drains or watercourses. Caution should be taken on
linoleum floors, which may experience slight discoloration from household traffic stains, including
asphalt driveway sealers. Consult your linoleum manufacturer for suggestions. KEEP FROM FREEZ
ING. Do not use in drinking water or food systems.